1pc 50MHz-6GHz UHF 2.4G Broadband Low Noise Amplifier RF LNA Amp Module 20DB VHF

Description

This amplifier has the advantages of wide frequency range, stable gain, small noise figure, and large dynamic range (+ 20dBm @ 1dBP). It is especially suitable for various RF transmitting circuits and increase communication distance! Widely used in short-wave, FM broadcast, remote control receiver, cable TV signal amplifier, Beidou, GPS satellite navigation, 2.4G Bluetooth, WIFI receiver RF end and other RF amplification places! The amplifier has a shielded housing with anti-reverse protection diodes.
Introduction:
1. Supply voltage: 5V DC (typical current value 100MA)
2. Gain: 19.5DB Input and output impedance: 50 ohms
3. P1DB: 20dBm (under 50 ohm load)
4. Input signal: <= 0DBM (the output signal is distorted when the input is greater than 0dBm)
5. Bandwidth: 50MHz to 6GHz (the gain is different at different frequencies, please refer to the S21 curve index for details)
6. Noise figure: 3.5dB (measured at 3GHz)
7. Others: When different gain values are required, the supply voltage can be reduced.
Shipping list:
1pcs 50MHz-6GHz UHF 2.4G Broadband Low Noise Amplifier RF LNA Amp Module 20DB VHF HF