AD9102 Evaluation Module 14-Bit 180Mhz Digital-to-Analog Conversion/Waveform

Description

AD9102 Evaluation Module 14-Bit 180Mhz Digital-to-Analog Conversion/Waveform
Description
Description:
First, the module features:
1, AD9102 module is a senior engineer to build, fully refer to the official version of the design; PCB appearance is beautiful, layout and design is reasonable, materials are stressful;
2. The module is software designed from the perspective of function evaluation. It basically controls the module by means of direct control register. All the registers can be controlled by software. The advantage of this design is that it can quickly familiarize with the chip function and fully realize the function of the chip. The disadvantage is that the operation is a bit more complicated (please carefully consider this shortcoming before buying);
3, the main signal of the module: a, sine wave; b, triangle wave / sawtooth wave; c, SRAM arbitrary signal (4096 * 14 bit); d, AD9102 powerful through different combinations can produce different effects of the signal;
4, the frequency range of the module output: sine wave: 10Hz-50Mhz;
5, the range of amplitude of the module output: amplitude: 1Vp_p;
6, the module is mainly controlled by PC software:
a, the basic register is controlled by direct control register;
b, SRAM data is generated directly in a graphical way;
c, PC software design is very flexible, you can easily save / read the set data; d, module power-on can automatically load the saved settings;
7. There is a large-capacity EEPROM chip on the module, which can save 4 sets of 4096 SRAM data; but it takes about 10 seconds to read or write the data from the EEPROM. If the running indicator on the module stops flashing, it means Read or write to the EEPROM; but the module signal output is not affected during reading and writing;
8, button function:
Button 1, signal type switching: sine wave, triangle wave / sawtooth wave, any signal of SRAM;
Button 2, function button: sine wave: half wave / full wave, triangle wave / upper sawtooth wave / lower sawtooth wave, SRAM arbitrary signal: channel switching;
Button 3, frequency plus;
Button 4, frequency reduction;
9, power supply mode: direct USB power supply;
1PCS
New
x
AD9102 Evaluation Module 14-Bit 180Mhz Digital-to-Analog Conversion/Waveform
If you have any questions, please contact us in time, we will help you deal with the problem for the first time
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 15 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours(working day) for us to response. Thank you.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact.